Saturday, 22 Jun 2024
Technology

How to Restore Your Recorder’s Display Resolution to Factory Default

If you’ve tried changing the display output of your recorder to a higher resolution but your monitor doesn’t support it, you may experience issues like losing video signal, a black screen, or losing the live view. Don’t worry, we’ve got you covered! This troubleshooting guide will help you restore your recorder’s display output to its factory default resolution so that you can enjoy live viewing your cameras on your monitor again.

Before Changing the Display Output

Before you dive into changing the display output, make sure to verify and ensure that your monitor can support higher resolutions, especially 4K. Otherwise, you may encounter issues with video signal loss. It’s always better to double-check and avoid any inconveniences.

Part 1 – NR900 Series and N881/N882 Series

If you own one of the following recorders – NR900, N881, N882, or N883 – follow these steps to restore your recorder’s default display output:

  1. Plug in your recorder.
  2. Press and hold the FN (function) button until the system restarts.

After the reset, your recorder will display the lowest available resolution to ensure compatibility with a variety of low-resolution monitors.

Tham Khảo Thêm:  The Reasons to Put iPod in Recovery Mode

Part 2 – N861 Series

For owners of the N861 or N862 recorder, here’s how you can restore your recorder’s default display output:

  1. Plug in your recorder.
  2. Keep tapping the panic button until you see the Lorex screen on your monitor.

Once your monitor displays the Lorex screen, the reset is complete. Easy, right?

Part 3 – D841/D861 Series and N841/N842/N843 Series

If you have any of the following recorders – D841, D861, N841, N842, or N843 – follow these instructions to restore your recorder’s default display output:

  1. While holding the panic button, plug in your recorder.
  2. Keep holding until you see the Lorex screen on your monitor.

Just like that, after the reset, your recorder will display the lowest available resolution to ensure compatibility with a variety of low-resolution monitors.

Note:

If your recorder model is not mentioned in this article, please reach out to our Tech Support team at 1-888-425-6739 for further assistance.

That’s it! Now you can easily restore your recorder’s display resolution to its factory default and enjoy a seamless live viewing experience on your monitor.