Wednesday, 17 Jul 2024
Technology

How to Access the Starlink Router Settings

starlink router login

One of the cool features of Starlink internet is the built-in statistics and administration tool. Using your mobile device or web browser, you can access the administration dashboard to check the system status, change settings, or view other information about your system.

The dish itself has firmware that generates this statistics page. You don’t necessarily need to be using the Starlink router to access the dashboard. In this article, I’ll explain the two methods of accessing the Starlink router administration page.

Starlink App Method

The easiest way to access the Starlink router administration dashboard is through the Starlink app. The Starlink app is available for iOS and Android devices. If you haven’t already, visit your app store and search for Starlink.

To access the Starlink router settings from the app, be sure you are connected to your Starlink Wifi network. Also, make sure you are logged into your Starlink account in the app.

When you open the app, you’ll land on the dashboard. Here, you’ll see important information, like the status of Starlink. There are also buttons for testing internet speed, checking for obstructions, adjusting network settings, and looking at network statistics.

The Settings button is where you’ll find advanced router settings, such as splitting the 2.4 and 5 GHz Wifi networks or enabling custom DNS.

Tham Khảo Thêm:  Protecting Your Personal Information from the Dark Web

Web Browser Method

The other way to access the Starlink router is through a web browser on a device that is on your Starlink home network. This method doesn’t require the use of the app, just a web browser.

To access Starlink via a web browser, type in the following IP address in your web browser:

You can also use the Starlink dish IP address instead:

It’s important that you use http:// and not https:// when accessing the Starlink router page.

If you are using a third-party router and you have bypass mode enabled, you might need to manually type in the statistics URL to see your network statistics. Obviously, you won’t have access to other Starlink router options in bypass mode:

Still can’t get to the statistics page on a third-party router? Try creating a static route in your router configuration:

  • Network destination: 192.168.100.0
  • Subnet Mask: 255.255.255.0
  • Gateway: 192.168.100.1
  • Interface: WAN

The web version of the Starlink administrative dashboard has a similar layout and functions, but some settings and features are not available via the browser method. For example, you cannot change advanced Wifi settings.

How to Change the Starlink Wifi Password

When you first set up and install Starlink, one of the first things you are prompted to do is change the Starlink Wifi network name and password. If you’ve lost your password or you need to change it for any reason, you can do that in the Starlink app by following these steps:

  1. Open the Starlink app.
  2. Scroll down and tap “Settings”.
  3. Under “Wifi Configuration”, type in a new password (and/or network name) and hit “Save”.
  4. The router will reboot. Wait a minute or two and then reconnect to the Starlink Wifi network with your new password.
Tham Khảo Thêm:  How to Get iPhone/iPad out of Guided Access Mode

You will have to reconnect all of your other devices when the network name or password is changed.

Frequently Asked Questions

Q: Can I access the Starlink router settings without using the Starlink app?

A: Yes, you can access the Starlink router settings through a web browser on a device connected to your Starlink home network.

Q: Can I change advanced Wifi settings through the web browser method?

A: No, the web browser method does not allow you to change advanced Wifi settings. You can only access basic router settings through this method.

Q: Can I access network statistics on a third-party router in bypass mode?

A: Yes, you can manually type in the statistics URL to access network statistics on a third-party router in bypass mode.

Q: Will changing the Starlink Wifi password disconnect all my devices?

A: Yes, changing the Starlink Wifi password will disconnect all devices connected to the network. You will need to reconnect them using the new password.

Conclusion

In this article, we discussed two methods for accessing the Starlink router settings. Whether you prefer using the Starlink app or a web browser, you can easily access the administration dashboard and make changes to your system. Remember to use the appropriate method based on your preferences and requirements.

For more information, visit the Eireview website.