Wednesday, 17 Jul 2024
Technology

IP Cameras Default Passwords Directory

swann default password

Below is a directory of default passwords for over 50 IP camera manufacturers.

Note: Change Default Passwords

Leaving default passwords is dangerous and makes it easy for even inexperienced attackers to take control, brick, or watch your video feed. It is even riskier when cameras are made available over the Internet, as they can be attacked from anywhere in the world.

Manufacturer List Default Passwords

While it is strongly recommended to use complex passwords, users may still need to know the defaults when cameras are first configured or factory defaulted. Finding these credentials can be aggravating, with many manufacturers burying them in PDF manuals or not documenting them at all.

For each manufacturer, we list the username first and password section in the following format: username/password. Some manufacturers have multiple defaults or differences in newer/older firmwares.

  • ACTi: admin/123456 or Admin/123456
  • Amcrest: admin/admin
  • American Dynamics: admin/admin or admin/9999
  • Arecont Vision: none
  • AvertX: admin/1234
  • Avigilon: Previously admin/admin, changed to Administrator/<blank> in later firmware versions
  • Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation)
  • Basler: admin/admin
  • Bosch: None required, but new firmwares (6.0+) prompt users to create passwords on first login
  • Brickcom: admin/admin
  • Canon: root/camera
  • Cisco: No default password, requires creation during first login
  • Dahua: Requires password creation on first login. Previously, this process was recommended but could be canceled; older models default to admin/admin
  • Digital Watchdog: admin/admin
  • DRS: admin/1234
  • DVTel: Admin/1234
  • DynaColor: Admin/1234
  • FLIR: admin/fliradmin
  • FLIR (Dahua OEM): admin/admin
  • FLIR (Quasar/Ariel): admin/admin
  • Foscam: admin/<blank>
  • GeoVision: admin/admin
  • Grandstream: admin/admin
  • Hanwha: admin/no default password, must be created during initial setup
  • Hikvision: Firmware 5.3.0 and up requires unique password creation; previously admin/12345
  • Honeywell: admin/1234
  • IndigoVision (Ultra): none
  • IndigoVision (BX/GX): Admin/1234
  • Intellio: admin/admin
  • Interlogix: admin/1234
  • IQinVision: root/system
  • IPX-DDK: root/admin or root/Admin
  • JVC: admin/jvc
  • Longse: admin/12345
  • Lorex: admin/admin
  • LTS: Requires unique password creation; previously admin/12345
  • March Networks: admin/<blank>
  • Mobotix: admin/meinsm
  • Northern: Firmware 5.3.0 and up requires unique password creation; previously admin/12345
  • Oncam: admin/admin
  • Panasonic: Firmware 2.40 and up requires username/password creation; previously admin/12345
  • Pelco: New firmwares require unique password creation; previously admin/admin
  • Pixord: admin/admin
  • Q-See: admin/admin or admin/123456
  • Reolink: admin/<blank>
  • Samsung Electronics: root/root or admin/4321
  • Samsung Techwin (old): admin/1111111
  • Samsung (new): Previously admin/4321, but new firmwares require unique password creation
  • Sanyo: admin/admin
  • Scallop: admin/password
  • Sentry360 (mini): admin/1234
  • Sentry360 (pro): none
  • Sony: admin/admin
  • Speco: admin/1234
  • Stardot: admin/admin
  • Starvedia: admin/<blank>
  • Sunell: admin/admin
  • SV3C: admin/123456
  • Swann: admin/12345
  • Trendnet: admin/admin
  • Toshiba: root/ikwd
  • VideoIQ: supervisor/supervisor
  • Vivotek: root/<blank>
  • Ubiquiti: ubnt/ubnt
  • Uniview: admin/123456
  • W-Box (Hikvision OEM, old): admin/wbox123
  • W-Box (Sunell OEM, new): admin/admin
  • Wodsee: admin/<blank>

If we have missed a manufacturer or made errors, please comment (or email [email protected]), and we will add/fix it.

Tham Khảo Thêm:  How to Fix the "No Command" Error

Missing? May Be An OEM

Dahua and Hikvision have 100+ relabelers/OEMs, and many of them may simply use the same password requirements as their base manufacturer. If your chosen manufacturer is not listed, check our Hikvision OEM Directory and Dahua OEM Directory to see if they may be relabeled.

Strong Password Measures Increasing

Strong password measures are increasing to combat potential security risks. It is crucial to prioritize password security to protect your IP cameras and maintain the privacy of your video feed.

Frequently Asked Questions

Coming soon!

Conclusion

In conclusion, default passwords for IP cameras pose a significant security risk. It is essential to change these default passwords to ensure the protection of your camera and video feed. Manufacturers have varying default password requirements, and it is crucial to familiarize yourself with them during the initial camera setup. Remember to use strong, unique passwords to enhance your camera’s security and prevent unauthorized access.

Note: This article is created by Eireview – Extractive Industries Review. To learn more about Eireview, visit their official website here.